1.6 KiB
Use adb tcpip to enable ADB over network.
Setup Android Device
Connect Device via USB
Connect Android device to a PC via USB, and make sure ADB recognize your device.
$ adb devices
List of devices attached
0123456789ABCDEF device
Enable network of ADB
Use below command to enable network of ADB:
adb tcpip 5555
Get IP of Device
We have to get IP of Device, because another PC need this for connection.
If you connect your device to router with ethernet, pass eth0 to below command to get IP address of device.
adb shell "ifconfig eth0 | grep 'inet addr' | cut -d: -f2 | awk '{print \$1}'"
If you connect your device to router with WIFI, change eth0 to wlan0, like:
adb shell "ifconfig wlan0 | grep 'inet addr' | cut -d: -f2 | awk '{print \$1}'"
Above command will return IP address of eth0, like:
!
Remember your IP address.
Setup PC
Now we have to setup our PC that in the same network with our Android device. Please note this PC doesn't connect to your Android device via USB. So we have to enable connection between PC and your Android devicem, and we need IP address of Android device, you had this at step ADB tcpip#Get IP of Device.
Pass your IP of Android device to below command to enable connection of ADB:
adb connect 192.168.1.108:5555
Remember to change 192.168.1.108 to your really IP address.
Now we can use adb devices to check if we can recognize Android device by IP adress:
!20250115_101133_WindowsTerminal_496x107.png