vault backup: 2025-08-20 14:35:48

Affected files:
Too many files to list

21.04. Android/ADB tcpip.md

@@ -0,0 +1,48 @@
+Use `adb tcpip` to enable ADB over network.
+
+# Setup Android Device
+## Connect Device via USB
+Connect Android device to a PC via USB, and make sure ADB recognize your device.
+```bash
+$ adb devices
+List of devices attached
+0123456789ABCDEF        device
+```
+
+## Enable network of ADB
+Use below command to enable network of ADB:
+```bash
+adb tcpip 5555
+```
+
+## Get IP of Device
+We have to get IP of Device, because another PC need this for connection.
+
+If you connect your device to router with ethernet, pass `eth0` to below command to get IP address of device.
+```bash
+adb shell "ifconfig eth0 | grep 'inet addr' | cut -d: -f2 | awk '{print \$1}'"
+```
+
+If you connect your device to router with WIFI, change `eth0` to `wlan0`, like:
+```bash
+adb shell "ifconfig wlan0 | grep 'inet addr' | cut -d: -f2 | awk '{print \$1}'"
+```
+
+Above command will return IP address of eth0, like:
+![[20250115_100240_WindowsTerminal_1305x87.png]]
+
+**Remember your IP address.**
+
+# Setup PC
+Now we have to setup our PC that in the same network with our Android device. Please note this PC **doesn't connect to your Android device via USB**.
+So we have to enable connection between PC and your Android devicem, and we need IP address of Android device, you had this at step [[ADB tcpip#Get IP of Device|Get IP of Device]].
+
+Pass your IP of Android device to below command to enable connection of ADB:
+```
+adb connect 192.168.1.108:5555
+```
+
+Remember to change `192.168.1.108` to your really IP address.
+
+Now we can use `adb devices` to check if we can recognize Android device by IP adress:
+![[20250115_101133_WindowsTerminal_496x107.png|400]]